Heat pump
IVT + Therilly
Therilly’s AI runs your IVT heat pump on the cheapest spot-price hours and preheats before electricity prices surge.
IVT pumps are controlled through the Bosch/IVT Anywhere app and can also be integrated via Home Assistant. When support launches, Therilly schedules your ground-source, air-to-water or exhaust-air pump around the hourly electricity price. Using weather forecasts, the AI preheats the house and hot water ahead of price peaks and cuts electricity cost by 15-30 percent without affecting comfort.
What you get
- Planned control via the IVT Anywhere app (Bosch) and Home Assistant.
- Tailored optimisation for ground-source (Greenline), air-to-water (AirX) and exhaust-air (Vent).
- Pushes hot water and heating to cheap hours and preheats ahead of price peaks.
- Saves 15-30 percent on the electricity bill while keeping indoor comfort intact.
How to get started
- Join the waitlist and we’ll let you know when IVT support launches.
- At launch, connect IVT Anywhere (or Home Assistant) to Therilly.
- Therilly identifies your Greenline or AirX model and begins spot-price optimisation.
Supported models
- IVT Greenline HE/HT
- IVT Vent
- IVT AirX
- IVT PremiumLine
Common questions
Do I need to install anything? For IVT, just sign in to Therilly and grant access. No local software, no firmware updates.
Can I turn the AI off any time? Yes. One click hands full control back to your existing app. Therilly never gets in the way.
Frequently asked questions
- How do I connect IVT to Therilly?
- Join the waitlist and we’ll let you know when IVT support launches. At launch, connect IVT Anywhere (or Home Assistant) to Therilly. Therilly identifies your Greenline or AirX model and begins spot-price optimisation.
- Do I need to install any hardware?
- Usually not. If you already have a power meter like Tibber Pulse, Shelly EM or HomeWizard P1, signing in to Therilly is enough. If you don’t have a meter, we recommend HomeWizard P1 which requires no electrician.
- Can I control the pump myself any time?
- Yes. You can pause Therilly at any time and take back full manual control via the pump’s normal app. Therilly does not take over — it sits on top.
- How is the heat pump connected?
- Depending on model, either directly via the manufacturer cloud (Qvantum, Mitsubishi MELCloud) or via Home Assistant or Homey Pro. The connection takes 2–5 minutes and only requires that you sign in with your existing account.