Heat pump
Panasonic + Therilly
Coming soon: spot-price control of Panasonic Aquarea via Smart Cloud.
Therilly is developing a connection to Panasonic Aquarea Smart Cloud and Comfort Cloud (via the CZ-TAW1 adapter). The goal is for our AI to shift heating and hot water on your Aquarea air-to-water pump to the hours when the spot price is lowest, and to preheat the house ahead of expensive hours using the weather forecast — usually 15–30 percent lower electricity cost with no drop in comfort. This integration is planned and not yet active.
What you get
- Planned support for Aquarea T-CAP, the Aquarea J series and Aquarea High Performance
- Connects via Panasonic Aquarea Smart Cloud and Comfort Cloud with the CZ-TAW1 adapter
- AI loads hot water and runs heating when the spot price is lowest
- Weather-driven preheating ahead of price peaks — indoor comfort is preserved
How to get started
- Sign up for the waitlist and we will let you know when Panasonic support is ready.
- At launch you connect Aquarea Smart Cloud or Comfort Cloud (CZ-TAW1) to Therilly.
- Set your desired comfort and Therilly’s AI optimises heating and hot water against the spot price.
Supported models
- Panasonic Aquarea T-CAP
- Panasonic Aquarea J-serien
- Panasonic Aquarea High Performance
Common questions
Do I need to install anything? For Panasonic, just sign in to Therilly and grant access. No local software, no firmware updates.
Can I turn the AI off any time? Yes. One click hands full control back to your existing app. Therilly never gets in the way.
Frequently asked questions
- How do I connect Panasonic to Therilly?
- Sign up for the waitlist and we will let you know when Panasonic support is ready. At launch you connect Aquarea Smart Cloud or Comfort Cloud (CZ-TAW1) to Therilly. Set your desired comfort and Therilly’s AI optimises heating and hot water against the spot price.
- Do I need to install any hardware?
- Usually not. If you already have a power meter like Tibber Pulse, Shelly EM or HomeWizard P1, signing in to Therilly is enough. If you don’t have a meter, we recommend HomeWizard P1 which requires no electrician.
- Can I control the pump myself any time?
- Yes. You can pause Therilly at any time and take back full manual control via the pump’s normal app. Therilly does not take over — it sits on top.
- How is the heat pump connected?
- Depending on model, either directly via the manufacturer cloud (Qvantum, Mitsubishi MELCloud) or via Home Assistant or Homey Pro. The connection takes 2–5 minutes and only requires that you sign in with your existing account.